EasyManua.ls Logo

Crestron GLS-OIR-CSM-EX-BATT - Specifications; Product Specifications

Crestron GLS-OIR-CSM-EX-BATT
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 GLS-OIR-CSM-EX-BATT Product Manual Doc. 9239A
Specifications
Product specifications for the GLS-OIR-CSM-EX-BATT.
Product Specifications
Sensing
Motion Detection
Technology
Passive infrared (PIR) motion detection
Coverage Area 500 sqft (47 sq m)
Coverage Pattern 360° (half mask and perforated mask included)
Major Motion Area 150 to 500 sq ft (14 to 47 sq m)
Minor Motion Area 0 to 150 sq ft (0 to 14 sq m)
LED Indicators
STATUS (1) Red and (1) green LEDs for test mode, setup, and battery condition
Controls
SENSITIVITY (1) Knob (behind cover), adjusts PIR sensitivity from low to high
TIMEOUT (1) Knob (behind cover), adjusts timeout from 30 seconds to 30 minutes
TEST (1) Pushbutton (behind cover) for test mode, setup, and battery condition
Wireless
RF Transceiver infiNET EX 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default
channel 15;
IEEE 802.15.4 compliant
Range (typical) 50 ft (15 m) to gateway or nearest mesh network device(s), subject to site-
specific conditions and individual device capabilities, range between floors or
ceilings is limited to one level
Gateway Requires an infiNET EX gateway (sold separately)
Power Requirements
Battery (1) Ultralife® U9VL-J-P 9 Volt 1200 mAh lithium disposable battery (included)
Battery Life 10 years under normal operating conditions
Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (noncondensing)

Related product manuals