Crestron Horizon HZ-THSTAT - Firmware Upgrade; Configure the Device

Wiring a Local Power Source
NOTE: If the HVAC system only requires one reference, a 24VAC power
source can be used to power the device locally.
Firmware Upgrade
Before using the thermostat, ensure it is using the latest firmware.
Check for the latest firmware at www.crestron.com/firmware. Load the
firmware onto the thermostat using Crestron Toolbox™ software or
web-based user interface.
Configure the Device
To set up the thermostat:
1. Swipe up from the bottom of the screen.
12
HZ-THSTAT
QuickStart
Horizon® Wireless Thermostat