Crestron TPS-6 Isys™ 5.7” Tilt Touchpanel
Touch IP Address to enter the STATIC IP SETTINGS menu, as shown in the
following illustration.
ETHERNET SETUP (STATIC IP SETTINGS Menu)
From the STATIC IP SETTINGS menu, touch the Edit buttons to enter the menus
that allow you to set the IP Address, Subnet Mask and Default Router, as shown in
the following illustrations. + and – buttons on each menu are provided for setting the
numbers. In each case, touch RETURN to go back to the previous menu.
ETHERNET SETUP (EDIT IP ADDRESS Menu)
Operations Guide – DOC. 6945A Isys™ 5.7” Tilt Touchpanel: TPS-6 • 19
To Next Page
Loading...
Need help?
General
