Crestron IV-CAMFL-N-W-1B User Manual

26 • IV-CAMFL-N-W-1B Product Manual — Doc. 9321A
Lost Timeout
Defines how long the camera waits before returning to preset 0 once the subject has left the
Tracking Zone.
Target Lost Action
Determines whether the camera returns to preset 0 or stays on preset 1 when no subject is being
tracked.
Video AutoSwitch
Determines if the camera should switch to full room view when a presenter leaves tracking zone.
Power on State
Determines whether the camera tracks or stays static when it is powered on.
USB Switch
Reserved for future use.
Host Switch
Reserved for future use.
Advanced 2 Tab
The Advanced 2 tab is used for adjusting settings pertaining to the way the camera will interface
with 3rd party control systems.
By default, these settings are configured to ensure maximum compatibility with 1Beyond
Automate Systems. Only change these settings if required by your control system.
Monitor RTSP Streams
The RTSP IP video streams that are being broadcast by the camera can also be previewed and
monitored in third-party apps like VLC Media Player® software. The following example
demonstrates how to access the streams in the VLC® player.
1. Launch VLC player and click Media > Open Network Stream.
2. Select Open Media > Network (tab) and enter the RTSP URL using the following syntax:
rtsp://xx.xx.xx.xx:554/4.h264

Crestron IV-CAMFL-N-W-1B Specifications

General

Brand	Crestron
Model	IV-CAMFL-N-W-1B
Category	Security Camera
Language	English