Product Manual — Doc. 7927K TSW-560, TSW-760, and TSW-1060 • 103
Claim Device Dialog Box
4. Enter the MAC address and serial number recorded in step 1 in the MAC Address and Serial
Number fields, respectively.
5. Click Claim. A success message is displayed if the claim is successful.
NOTE: If an error message is displayed stating that the device does not exist, connect the
device to a network that has access to the Internet, wait 15 minutes, and then try again.
6. Click X to close the dialog box. The hostname of the claimed device is displayed in the device
tree under the group Unassociated Devices.
Unassociated Devices
The device may now be managed and assigned to a group.
Claim Multiple Devices
To claim multiple devices:
1. Record the MAC address and serial number of each device as a comma delimited CSV file.
The MAC address and serial number are labeled on the shipping box or on a sticker attached
to the device.
To Next Page
Loading...
