Crestron TSW-560 - Network Proxy Settings

40 • TSW-560, TSW-760, and TSW-1060 Product Manual — Doc. 7927K
Network Proxy Settings
Click Network Proxy Settings to configure network proxy settings for the touch screen.
Settings Tab – Network Proxy Settings
l Proxy: Toggle the switch to enable or disable configuring the touch screen for use with a
proxy server.
l HTTP Settings
o
HTTP Proxy: Toggle the switch to enable or disable an HTTP proxy server.
o
HTTP Proxy Address: Enter the IP address of the HTTP proxy server.
o
HTTP Proxy Port: Enter the port number of the HTTP proxy server.
o
Username: Enter the username required for the HTTP proxy server.
o
Password: Enter the password required for the HTTP proxy server.
l HTTPS Settings
o
HTTPS Proxy: Toggle the switch to enable or disable an HTTPS proxy server.
o
HTTPS Proxy Address: Enter the IP address of the HTTPS proxy server.
o
HTTPS Proxy Port: Enter the port number of the HTTPS proxy server.
o
Username: Enter the username required for the HTTPS proxy server.
o
Password: Enter the password required for the HTTPS proxy server.