Product Manual — Doc. 7927K TSW-560, TSW-760, and TSW-1060 • 7
To change a static IP address, tap Off under DHCP Enable. Then, tap Set Static IP Address
Settings to display the Static IP Ethernet Setup screen.
Static IPEthernet SetupScreen
To edit the static IP address, the static subnet mask, the static default router, the preferred DNS,
or the alternate preferred DNS, tap the text field underneath the setting name.
The on-screen numeric keypad opens for the chosen setting.
Edit IP Address On-Screen Numeric Keypad
To Next Page
Loading...
Need help?
General
