44 • TSW-560, TSW-760, and TSW-1060 Product Manual — Doc. 7927K
The following settings are displayed for the current user:
l Name: The chosen username
l Access Level: The access level granted to the user (Administrator, Programmer, Operator,
User, or Connect)
l Active Directory User: Reports whether the current user is (Yes) or is not (No) authenticated
through Active Directory® software
NOTE: A user must be added to an Active Directory group before the user may be selected
as an active directory user. For more information, refer to Groups (on page48).
l Groups: Any groups of which the current user is a member
Click Change Current User Password to change the password for the current user. The Change
Password dialog box is displayed.
Change Password Dialog Box
Enter a new password in the Password field, and then reenter the password in the Confirm
Password field.
Tap OK to save the new password, or tap Cancel to cancel the change.
To Next Page
Loading...
