Product Manual — Doc. 7927K TSW-560, TSW-760, and TSW-1060 • 5
The main Setup screen is displayed (TSW-1060 shown).
TSW-1060 Setup Screen
NOTE:The touch screen also provides a web configuration interface that may be used to view
and configure various touch screen settings. For more information, refer to Web Configuration
(on page27).
The Setup screen shows the IP address, hostname, and MAC address of the touch screen and
provides the following configuration selections:
l Buttons for Ethernet setup, IP table setup, audio setup, display setup, standby timeouts,
application selection, and diagnostics.
l Abutton to toggle system messages on or off
l An About button that provides information about the touch screen.
The functions of each button are detailed in the following pages of this guide.
NOTE: A toolbar is present on the bottom of all setup screens. The toolbar provides a gear
button that may be tapped to return to the Setup screen and a Save & Exit button that may
be tapped to save all settings, to exit the setup screens, and to return to the selected scheduling
application.
To Next Page
Loading...
Need help?
General
