Crestron UC-MMX30-T-I - Page 8

3. Connect power and the content ingest device (HD-CONV-USB-250) to the top of the UC Presentation Transmitter. Connect the UC Engine or
LAN to make a direct or network connection as described in step 1.
NOTE: If a longer cable between the UC Presentation Transmitter and the HD-CONV-USB-250 is needed, use a DigitalMedia™ Ultra cable only. The
maximum supported cable length is 300ft (91.4 m).
8
UC-MMX30-T(-I) and UC-MMX30-T-L(-I)
QuickStart
Crestron Flex Advanced Tabletop Small Room Video Conference System for Microsoft Teams® Rooms