EasyManuals Logo
Home>Crestron>Amplifier>X Series

Crestron X Series User Manual

Crestron X Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Electrical Connection:
“This product must be connected to an earthed mains socket-outlet.”
Finland: “Laite on liitettävä suojamaadoituskoskettimilla varustettuun
pistorasiaan.”
Norway: “Apparatet må tilkoples jordet stikkontakt.”
Sweden: “Apparaten skall anslutas till jordat uttag.”
Denmark: “Apparatets stikprop skal tilsluttes en stikkontakt med jord
som giver forbindelse til stikproppens jord.”
This symbol indicates a potential shock hazard.
This equipment is not suitable for use in locations where children are
likely to be present.
CAUTIONS:
l Do not touch uninsulated parts of terminals and bare wiring.
Touching uninsulated terminals or wiring may result in an
unpleasant sensation.
l Do not connect any equipment that has a direct connection to
mains circuitry to audio inputs or outputs. All mains supplied
equipment connected to the product must have an approved safety
barrier.
Mount into a Rack
Each rack mounting configuration for the amplifier will occupy 1 RU of
rack space. Mount the configuration with the rack ears attached into
the rack using four mounting screws (not included).
Mount on a Flat Surface
Using two anchors (not included) and two mounting screws (not
included), mount the device onto a flat surface such as a wall.
NOTE: Be sure to mount the amplifier on a flat surface with the rear
panel facing upwards.
5
AMP-X75
QuickStart
X-Series Amplifier,75 W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crestron X Series and is the answer not in the manual?

Crestron X Series Specifications

General IconGeneral
BrandCrestron
ModelX Series
CategoryAmplifier
LanguageEnglish

Related product manuals