AP160016 MAINTENANCE & TROUBLE SHOOTING
PERIODIC MAINTENANCE:
1. Check power cord for any breaks, separations, or cuts.
2. Make sure the ground pin or grounding prong is intact or the machine will be unsafe to
operate.
TROUBLE SHOOTING (if the dryer will not be running):
1. Check electrical cord; is it firmly seated in wall outlet
2. Check if dryer circuit breaker is tripped, reset if necessary
3. Check to see if building circuit breaker is tripped.
4. If using an extension cord, make sure it is in good condition, proper gauge and firmly
connected.
To Next Page
Loading...