AP110020 OPERATION & MAINTENANCE
Plug your Air Mover into a standard grounded outlet with the correct voltage and amperage. If you
are unsure about the outlet, contact your supervisor. Turn on the switch and check that the unit
operates properly before letting it run.
MAINTENANCE:
• Inspect the electrical cord and wiring for damage or discoloration
• Inspect for loose fasteners
• Clean grills on the front and back of the unit
• Listen for abnormal sounds
• Keep unit clean
PERIODIC MAINTENANCE:
Use compressed air or a vacuum to remove lint and other debris from the motor, screen, and blower
wheel. Do not use a pressure washer to clean the unit
GROUNDING INSTRUCTIONS:
This machine must be grounded. If it should malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. This machine is equipped
with a cord having an equipment grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug provided with the machine if it will not fit
the outlet; have a proper outlet installed by a qualified electrician.
EXTENSION CORDS:
Use only three-wire 16/3 or larger gauge approved extension cords that have three-prong grounding
type plugs and three-pole receptacles that accept the appliance’s plug. Replace or repair any
damaged cords or plugs.
WARNING! - For the safe operation of this machine follow the instructions given in this booklet
and the training given by your supervisor. Failure to do so can result in personal injury and/or
damage to machine and property!
DO NOT OPERATE MACHINE IN AN EXPLOSIVE ENVIRONMENT!
To Next Page
Loading...