Pinto BT-POM 1212 - Revision 5
Foreword
About This Manual
This manual provides assembly, setting up,
operating and maintenance instructions for
the Croplands Pinto sprayer.
Some features explained in this manual
may not be installed on your sprayer.
Please pass on this manual with the
sprayer at the time of resale for usage by
the new owner.
Before Operating
Your Sprayer
1 Before attempting to use your
sprayer, make sure you
read the Operator’s Manual and
properly understand:
• All Safety Issues.
• Assembly & Installation
instructions.
• Calibration of the sprayer.
• Sprayer Operation.
• Sprayer Maintenance.
2 Read and follow instructions on
chemical manufacturers' labels.
3 Always wear applicable protective
clothing.
Read and understand this Operators’ Manual before
operating the sprayer.
Terminology
These terms/symbols used throughout
this manual:
• NOTE - to convey useful
operating information.
• CAUTION - to highlight potential
injury or machinery
damage.
• WARNING - to stress potential
dangers and the
importance of
personal safety.
Indicates the strong possiblility of severe
personal injury or damage to machinery if
instructions are not followed.
WARNING
Highlights hazards, unsafe/unwise practices
which could cause injury, damage to property,
machinery or loss of crop yield if instructions
are not followed.
CAUTION
Refers to important and useful information which
should not be overlooked.
NOTE
To Next Page
Loading...