Fig. 3 EXTERNAL EMERGENCY STOP
SWITCH (TYPICAL)
17
Fig. 2 GAS ENGINE CONTROLS
Honda
c
a
d
e
b
3. Drum Position:
This lever sets the position of the mixing drum.
Move the lever down to empty the drum and
up to mix.
4. Drum Position Lock:
This lever locks the mixing drum in its mixing
position. Pull up on lever to release the lock.
It will automatically engage when the drum is
moved into its mixing position.
Machine is shown with engine hood open
for illustrative purposes only. Never oper-
ate with hood open.
WARNING
2. Electric Motor (Typical):
a. Master ON/OFF:
This switch controls the power to the electric
motor that turns the mixing elements in the
drum. Move the switch rearward to turn ON
and forward for OFF.
Fig. 5 DRUM EMPTYING CONTROLS
Switch
Fig. 4 ELECTRIC MOTOR (TYPICAL)
3
4
5
5. Drive Engagement Clutch:
This lever engages and disengages the mixing ele-
ments in the drum. Move to the left to disengage
the drive and ease to the right to engage. Always
disengage before starting the engine or motor and
To Next Page
Loading...
