2. Change gearbox oil
3. Repack wheel bearings. (2 locations).
4. Check wheel nut torque.
5. Check axle mounting hardware.
Annually or 400 Hours
1. Grease the electric motor bearings with
1/2 shot of grease (2 locations).
37
š Engine Fluid Levels
š Engine Oil Level & Fuel Level
DAILY OR 8 HOURS
š Drive Belt Tension
L Drum Assembly Bearings (2)
See Lubrication and Maintenance sections for details of service. Copy this page to continue record.
ACTION CODE: š CHECK C CHANGE CL CLEAN
L LUBRICATE RE REMOVE R REPACK
HOURS
SERVICED
BY
MAINTENANCE
L Clutch Linkage Shaft (1)
WEEKLY OR 50 HOURS
ANNUALLY OR 400 HOURS
5.1.4 SERVICE RECORD
CL Engine, Motor & Compartment
CL Engine Air Intake Filter
C Engine Oil, Drain Plug & Fill Plug
L Electric Motor Bearings (2)
š Gearbox Oil Level
R Wheel Bearings (2)
C Gearbox Oil
š Wheel Nut Torque
š Check Axle Mounting Hardware
Fig. 29 WHEELS
To Next Page
Loading...
