7 SPECIFICATIONS
46
7.1 MECHANICAL
Model 4S 5S/S4S 6S 6SR/S6SR 6PR 8S/S8S 8P 10S 12S/S12S
Shaft R.P.M. Max: 38 46 38 38 38 32 32 32 32
Wrap Thickness: 10 USG 10 USG 10 USG 7 USG 1/4" 7USG 1/4" 7 USG 7 USG
End Plate Thickness: 7 USG 7 USG 7 USG 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
Drum Material: Steel Steel Steel Steel Polymer Steel Polymer Steel Steel
Drum Width: 23-1/4" 23-1/4" 23-1/4" 23-1/4" 23-1/4" 29-5/8" 29-5/8" 29-5/8" 29-5/8"
Drum Height: 24" 24" 27-1/2" 27-1/2" 31" 31" 31" 31" 31"
Drum Length: 26 3/4" 26 3/4" 26 3/4" 26 3/4" 26 3/4" 25-3/16" 25-3/16" 29-13/16" 33-3/4"
Capacity Bags: 1 to 1-1/2 1 to 1-1/2 2 to 2-1/2 2 to 2-1/2 2 to 2-1/2 2-1/2 to 3 2-1/2 to 3 3 to 3-1/2 3-1/2 to 4
Capacity Cubic Feet: 4 cu ft 4 cu ft 6 cu ft 6 cu ft 6 cu ft 8 cu ft 8 cu ft 10 cu ft 12 cu ft
Overall Height: 42-1/2" 42-1/2" 46" 56" 56" 54-1/2" 54-1/2" 54-1/2" 56"
Overall Width: 29-1/2" 29-12" 29-1/2" 49" 49" 49" 49" 49" 59"
Charging Height: 36-1/2" 36-1/2" 41" 49" 49" 49" 49" 49" 59"
Length - Tow Pole Out: 93" 93" 93" 93" 93" 93" 93" 97" 014"
Length - Tow Pole In: 65" 65" 65" 65" 65" 66" 66" 70" 83-1/2"
Tires (Pneumatic): 4.00 x 8 4.00 x 8 4.00 x 8 5.50 x 12 5.50 x 12 5.50 x 12 5.50 x 12 5.50 x 12 6.00 x 12
High Speed Bearings? NO No No Yes Yes Yes Yes Yes Yes
Gear reduction System? Yes Yes Yes Yes Yes Yes Yes Yes Yes
ELECTRIC POWER
HP 1/2 Hp 1 Hp 1.5 Hp 1.5 Hp 2 Hp 2 Hp 3 Hp 3 Hp 5 Hp 5Hp
Volts 110/220 110/220 110/220 230/460 110/220 230/460 220 230/460 220 230/460
Phase 1 1 1 3 1 3 1 3 1 3
Amps 8.4/4.2 12.4/6.2 18.0/9.0 4.8/2.4 20.4/10.2 6.4/3.2 16 8.6/4.3 23 14.0/7.0
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
To Next Page
Loading...
