Crown ce 4000 - Da Rules

Page 5Page 4
Reference Manual
Reference Manual
CE 4000 The amp with an Attitude!CE 4000 The amp with an Attitude!
Da Rules
Da Rules
Hey! I'm Eric
Let me fill you
in about your
new CE 4000
Amp!!
3. WARNING: Shock
hazard. To reduce the
risk of fire or electric
shock, do not expose
this unit to rain,
moisture or splashing.
Do not immerse your CE
4000 amplifier in any
liquid. Do not operate
your amplifier near a
pool, bathtub or other
standing water (even on
a dare).
4. Do not bypass or defeat
the grounding or
polarization means used
on the CE 4000
amplifi-
ers. Make sure all blades
on the polarized power
plug can be fully inserted
into the receptacle or
other outlet that will be
used with the unit.
5. Your CE 4000 amp should
be cleaned only with a
dry cloth.
6. Take care of the power
cord attached to your CE
4000 amplifier. Avoid
situations where your
cord might be stretched,
pinched, or otherwise
abused. Route it to avoid
foot traffic. Pay special
attention to the cord
connector and attachment
points.
7. Do not attempt to service
this unit beyond instructions
contained in this manual.
Refer all servicing to the
Crown Service Department.
8. Keep your CE 4000 amplifier
away from sources of heat,
such as a radiator or oven.
Do not cover or surround
your amp with material
which may retain heat, such
as a blanket or curtain.
9. Obtain assistance
from qualified service
personnel if any of the
following occurs:
• The power cord or plug
has been damaged in
any way.
• Foreign objects or
liquid have fallen into
the amplifier enclosure.
• The amplifier has been
exposed to rain or has
been partially or totally
immersed in any liquid.
• The amplifier has been
dropped or the chassis
has been damaged.
• You notice a marked
change in perfor-
mance, or your CE
4000 amp does not
Lightning Bolt Symbol:
This symbol is used to alert the
user to the presence of dangerous
voltages and the possible risk of
electric shock.
Exclamation Mark Symbol:
This symbol is used to alert the
user to make special note of
important operating or mainte-
nance instructions found in the
reference manual.
1. Read all safety and operating instructions
before operating the CE 4000 amplifier.
Follow all instructions carefully and heed
any warnings given.
2. Do not drop or spill any foreign object or
liquid into the CE 4000 amplifier.
Keep these
instructions
where you can
look at em
later!
appear to operate
normally.
10. CAUTION: Do not locate
sensitive, high-gain
equipment such as
preamplifiers or tape
decks directly above or
below the unit. If an
equipment rack is used,
we recommend locating
the amplifier(s) in the
bottom of the rack and
the preamplifier or other
sensitive equipment at
the top.