Macro-Tech 2400 Amplifier Service Manual
17
Parts List (Non-Module)
Supplimental Items
CPN ITEM QTY
D 4137-2 Nylon Thumbscrew Washer 4
C 3342-0 Feet, Black Self-Stick 4
A10087-71012 10-32 .75 Machine (Rack Screw) 4
K80449D2 MA Series Owners Manual 1
Power Supply
CPN ITEM QTY
D 6974-6 Insulator, Fuse Board 1
A10089-11032 Screw, 10-32 x 2 (for transformers) 8
A10094-8 Washer, #10 Int Star, Zinc (transformers) 8
A10099-7 Shoulder Washer, #10 Nylon (transformers) 8
A10100-16 Washer, 7/16OD x .203ID (transformers) 8
A10102-8 Nut, 10-32 Hex Zinc (transformers) 8
A10094-8 Lockwasher, #10 Internal Tooth 4
A10098-5 Washer, 1/4" Belleville Spring 4
C 8752-5 35A 400V Bridge Rectifier 2
C 9870-4 Screw, 10-32 x .38 4
D 6764-1 Washer, Shoulder 4
D 8438-0 Bracket, Capacitor 2
D 8639-3 6300uF 150V Electrolytic Capacitor 2
A10285-10 Fuse, 1A (100V-120V) 1
A10285-7 Fuse, .5A (200V-240V) 1
C10169-8 Breaker, 15A (100V-120V) 2
C10171-4 Breaker, 8A (200V-240V) 2
D 8993-4 Transformer, Power (120V, 60Hz) 2
D 9017-1 Transformer, Power (Universal Volt) 2
H42875-7 Transmotor (120V 60Hz) 1
H42928-4 Transmotor (200V-240V) 1
Output Assembly (One Per Channel)
CPN ITEM QTY (PER CHANNEL)
A10315-1 Screw, 6-32 x .56 Hex Washer Head, Torx 12
C 8187-4 NPN Power Transistor 6
C 8188-2 PNP Power Transistor 6
C 9387-9 Plasti-Rivit, .156 2 Prong Black 2
C 9491-9 Screw, 6-32 x .312 Pan Head 27
D 7796-2 Sil Pad (between heatsink and chassis) 1
-For units with P10315-3 output boards use D 6280-8
-For units with boards older than P10315-3 use D 6104-0
D 7797-0 Pad (between module and chassis) 1
-For units with P10315-3 output boards use C 7597-4
-For units with boards older than P10315-3 use D 7026-4
D 8197-2 Paper Shroud, 1.75 x 14.45 1
D 8774-8 PTC, 95DegC Cast Alum 1
F12019-0 Heatsink Under Bias Diodes 1
B 5842-8 Tubing, #23 TFE (For Q18) Order in Inches
C 8813-5 MPS8097/MPSA18 (Q18) 1
B 5464-1 Tubing, #24 Teflon, Thin Wall (For S100/S200) Order in Inches
C 5826-0 LM234Z-6 Thermal Sense (S100/S200) 1
To Next Page
Loading...
Need help?
General