To Next PageTo Next Page
Need help?Do you have a question about the Crown Micro-Tech 600 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| 4 Ohm Stereo | 450W per channel |
| 8 Ohm Bridged | 900W |
| Total Harmonic Distortion | <0.05% |
| Input Impedance | 20k Ohms balanced, 10k Ohms unbalanced |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | >100 dB |
| Input Sensitivity | 1.4V |
| Cooling | Continuously variable speed forced air |
Details items not covered by the Crown warranty, such as misuse or accidental damage.
Outlines Crown's commitment to repair, replace, or refund defective products.
Instructions for notifying Crown and submitting units for warranty repair within the specified period.
States that Crown is not liable for indirect damages resulting from product defects.
Clarifies policies on modifying or extending the warranty terms and conditions.
Specifies the time limit for legal action related to the warranty.
Explains the three operating modes: Stereo, Bridge-Mono, and Parallel-Mono.
Safety and performance guidelines for using the amplifier, including wiring and power handling.
Introduces the various protection systems integrated into the amplifiers.
Details Crown's Output Device Emulation Protection for preventing amplifier shutdown.
Lists guaranteed minimum power outputs for various models, modes, and impedances.
Defines minimum power output guarantees under specific test conditions.
How to obtain service globally through authorized centers with proof of purchase.
Options for service via authorized centers or direct factory repair.
Guidelines for safely packing and shipping units to the Crown factory for repair.
