16 Power On & Off
Power On & Off
KEY SWITCH
• Turn the key clockwise to turn the truck ON.
• When leaving the truck, turn the key
counterclockwise to shut the truck OFF.
FOOT PEDALS/ PADS
Place your left foot on the left brake pedal, and your
right foot on the sensor pad. Turn the key ON and lift
your left foot for a moment to cycle the brake. Return
your foot to the pedal. Lift your right foot and return
it to the pedal. Move the travel control and return it to
center. The truck is ready for operation.
ENTRY BAR® SAFTEY SWITCH
Always keep your feet in the operator area and clear of
the entry bar.
If you put your foot on the entry bar while traveling,
the alarm will sound and the truck will slow to a stop.
EMERGENCY DISCONNECT
Push the Emergency Disconnect button to cut power
to the truck.
Use the Emergency Disconnect to shut the truck down
any time it isn't working correctly. Don't use the truck
if it's not working correctly. Notify your supervisor.
Turn the key switch to OFF and back to ON to
reconnect the battery and reset the Emergency
Disconnect button.
To Next Page
Loading...