11
Step 3. Connect LCD module to the inverter with an optional RJ45 communication cable as shown below.
Communication Options
Serial Connection
Please use the supplied serial cable to connect between the inverter and your PC. Install the monitoring
software from the bundled CD and follow the on-screen instructions to complete your installation. For
detailed software operation, refer to the software user manual on the bundled CD.
Wi-Fi Connection
This unit is equipped with a Wi-Fi transmitter. Wi-Fi transmitter can enable wireless communication between
off-grid inverters and monitoring platform. Users can access and control the monitored inverter with
downloaded APP. You may f ind “Crown Monitor” app from the Apple
®
Store or Google
®
Play Store. All data
loggers and parameters are saved in iCloud. For quick installation and operation, please check Appendix B.
BMS communication
USB communication
To PC
RS-232 communication
To PC
Remote
communication
To Next Page
Loading...