To Next PageTo Next Page
Need help?Do you have a question about the Crown XS1200 and is the answer not in the manual?
Performance| sensitivity | 1.4V |
|---|---|
| frequency response | 22 Hz to 22 kHz ±1 dB |
| signal-to-noise ratio | A-weighted, > 102 dB |
Input and Output| input impedance (balanced) | 20 k ohms |
|---|---|
| input impedance (unbalanced) | 10 k ohms |
| dc output offset | ±75 millivolts |
Power| ac line voltage and frequency | 120VAC/60 Hz and 230VAC/50 Hz |
|---|---|
| air volume requirements | 80.15 ft³ (2.27 m³) per minute per unit |
| cooling | Internal heat sinks with forced-air cooling |
Weight and Dimensions| dimensions | 19 inch (48.3 cm) width, 3.5 inch (8.9 cm) height, 17.135 inch (43.5 cm) depth |
|---|---|
| net weight | 28 lb., 14 oz. (13.1 kg) |
| shipping weight | 34 lb (15.4 kg) |
Performance| sensitivity | 1.4V |
|---|---|
| frequency response | 22 Hz to 22 kHz ±1 dB |
| signal-to-noise ratio | A-weighted, > 102 dB |
Input and Output| input impedance (balanced) | 20 k ohms |
|---|---|
| input impedance (unbalanced) | 10 k ohms |
| dc output offset | ±75 millivolts |
Power| ac line voltage and frequency | 120VAC/60 Hz and 230VAC/50 Hz |
|---|---|
| air volume requirements | 80.15 ft³ (2.27 m³) per minute per unit |
| cooling | Internal heat sinks with forced-air cooling |
Weight and Dimensions| dimensions | 19 inch (48.3 cm) width, 3.5 inch (8.9 cm) height, 17.135 inch (43.5 cm) depth |
|---|---|
| net weight | 28 lb., 14 oz. (13.1 kg) |
| shipping weight | 34 lb (15.4 kg) |
Performance| sensitivity | 1.4V |
|---|---|
| frequency response | 22 Hz to 22 kHz ±1 dB |
| signal-to-noise ratio | A-weighted, > 102 dB |
Input and Output| input impedance (balanced) | 20 k ohms |
|---|---|
| input impedance (unbalanced) | 10 k ohms |
| dc output offset | ±75 millivolts |
Power| ac line voltage and frequency | 120VAC/60 Hz and 230VAC/50 Hz |
|---|---|
| air volume requirements | 80.15 ft³ (2.27 m³) per minute per unit |
| cooling | Internal heat sinks with forced-air cooling |
Weight and Dimensions| dimensions | 19 inch (48.3 cm) width, 3.5 inch (8.9 cm) height, 17.135 inch (43.5 cm) depth |
|---|---|
| net weight | 28 lb., 14 oz. (13.1 kg) |
| shipping weight | 34 lb (15.4 kg) |
Performance| sensitivity | 1.4V |
|---|---|
| frequency response | 22 Hz to 22 kHz ±1 dB |
| signal-to-noise ratio | A-weighted, > 102 dB |
Input and Output| input impedance (balanced) | 20 k ohms |
|---|---|
| input impedance (unbalanced) | 10 k ohms |
| dc output offset | ±75 millivolts |
Power| ac line voltage and frequency | 120VAC/60 Hz and 230VAC/50 Hz |
|---|---|
| air volume requirements | 80.15 ft³ (2.27 m³) per minute per unit |
| cooling | Internal heat sinks with forced-air cooling |
Weight and Dimensions| dimensions | 19 inch (48.3 cm) width, 3.5 inch (8.9 cm) height, 17.135 inch (43.5 cm) depth |
|---|---|
| net weight | 28 lb., 14 oz. (13.1 kg) |
| shipping weight | 34 lb (15.4 kg) |
Overview of the Xs Series amplifier's key features and design.
Guidance on effectively utilizing the manual for setup and operation.
Instructions for safely unpacking and inspecting the amplifier for transit damage.
Steps for properly installing the amplifier, including safety precautions before beginning.
Guidelines for maintaining adequate airflow and preventing overheating in rack installations.
Recommendations for selecting appropriate input wiring and connector types.
Guidance on selecting suitable output wiring and connector types for speaker connections.
Instructions on connecting speakers and input/output wiring for various configurations.
Detailed wiring instructions for stereo operation using binding posts or Speakon connectors.
Methods for feeding a single signal to both amplifier channels using Y-cables or jumpers.
Wiring configurations for bridge-mono operation, including switch settings and speaker connections.
Procedure for safely connecting the amplifier to the AC power source.
Methods to prevent speaker damage from clipping and subsonic signals.
Step-by-step instructions for safely powering on the amplifier.
Important precautions for safe and optimal amplifier performance and longevity.
Detailed explanation of the amplifier's front panel controls and indicator LEDs.
Description of back panel features and connectors specific to 2-channel models.
Description of back panel features and connectors for the Xs4300 model.
Covers output current limiting, DC protection, circuit breaker, and thermal protection features.
Information on obtaining service from authorized centers globally or through the Crown factory.
Covers service at local centers, factory service, and shipping instructions for the US and Canada.
Details Crown's 3-year warranty for new products against defects in materials and workmanship.
Lists items and conditions not covered by the Crown warranty, such as misuse or damage.
Explains how Crown will remedy defects, including repair, replacement, or refund.
Provides instructions on how to initiate and perform warranty service procedures.
