Crown XTi 2000 - Button Presses

XTi Series Power Ampliers
Operation Manual
操作手册
page 27
XTi 系列功率放大器
Bedienungsanleitung
Leistungsendstufen
Manual de Operación
Amplicadores de potencia
DESIRED FUNCTION BUTTON PRESSES
(starting from the current preset screen)
Set amplifier to BRIDGE-MONO mode by loading the Quick-Start BRIDGE preset Sel > Sel. Press Next until you see BRIDGE. Press Sel.
Set STEREO or BRIDGE-MONO mode manually
Sel > Next. Press Sel until the BRG icon flashes. Press Next to set the amplifier to Bridge-Mono,
or press Prev to set the amplifier to Stereo. Press Sel to select your choice.
Set up a crossover by loading the Quick-Start XOVER preset* Sel > Sel. Press Next until you see XOVER. Press Sel.
Drive subwoofers in bridge-mono mode by loading the BRG SUBS preset Sel > Sel. Press Next until you see BRG SUBS. Press Sel.
Generate extra low-frequency content when driving subs in bridge-mono by loading the
SUB SYNTH preset
Sel > Sel. Press Next until you see SUB SYNTH. Press Sel.
Select a user preset Sel > Sel. Press Next until you see PRESET 6, 7, 8, etc. Press Sel.
Set INPUT Y mode
Sel > Next > Sel. The Y icon flashes. Press Next to see the three options.
Choose one by pressing Sel.
Bypass EQ for Ch. 1 or Ch. 2
Sel > Next. Press Sel until the EQ icon flashes along with CH1 or CH2.
Press Next to bypass EQ. Press Sel.
Set DELAY for Ch. 1 or Ch. 2
Sel > Next. Press Sel until the DEL icon flashes along with CH1 or CH2.
Press Next until you see the amount of delay you want, then press Sel to select it.
Set LIMITING for Ch. 1 or Ch. 2
Sel > Next. Press Sel until the LIM icon flashes along with CH1 or CH2.
Press Next until you see the limiting threshold you want, then press Sel to select it.
Turn off all the DSP Sel > Sel. Press Next until you see DSP OFF. Press Sel.
Configure a USER PRESET or modify a FACTORY PRESET
1. Sel > Sel .
2. Press Next until you see the desired preset. Press Sel to select it.
3. Sel > Next.
4. Press Sel until you see the DSP process you want to apply to that preset.
5. Press Next to see the processing options, then press Sel to select an option.
6. Repeat Steps 1–5 for all the processes you wish to apply to that preset. The CUSTOM ICON
will light if a factory preset has been modified.
* When you call up the XOV process, Ch.1 will always be set to low frequencies and Ch. 2
will always be set to high frequencies. DO NOT connect high-frequency drivers to Ch. 1.
以下几页上的表格描述了实现各种功能
所需的按钮组合。提供了四张相同的
表，分别为不同语言，以方便实际使
用。
Die Tabellen auf den nächsten Seiten beschreiben die
Tastendruckabfolgen, um die verschiedenen
Funk tionen ansprechen zu können. Zur Erleichterung
der Bedienung haben wir vier identische Tabellen in
unter schiedlichen Sprachfassungen abgebildet.
Las tablas que aparecen en las próximas páginas
describen la secuencia de botones que se deben
pulsar a fin de lograr diversas funciones. Encontrará
cuatro tablas idénticas, cada una en un idioma
difer ente, para uso sencillo en el ámbito.
The tables on the next few pages describe what button
sequence to press in order to achieve various
func tions. Four identical tables are provided, each in a
dif ferent language, for easy use in the field.