Crystal nVision Reference Recorder - Core Operating Instructions

Page 6 • Crystal Engineering Corporation
Operating.Instructions
The nVision reference recorder is designed to be robust and easy to use. The following is further
detail on the functionality of the product that may already be summarized in the Quick Start
Instructions above. The main button features, clock-wise are:
.Home.button
The nVision reference recorder has multiple viewing screens available for your use. If
you ever need to get “home” simply press the home button to get you to a familiar or default
view (lower module numerical screen).
. .Next.button
On the nVision, pressing the next button allows you to scroll through the available
nVision screens. Available views are lower module numerical, upper module numerical, dual
module numerical, lower module graphical, upper module graphical and dual module graphical
depending upon how your nVision is populated.
. .Setup.button
Pressing the setup button brings up a selectable menu of features such as Clear
Peaks, Units, Settings, Summary and Recording. Use the navigation button up/down arrows to
move to the desired feature and use the select or right arrow buttons to move into the desired
function.
.X
Clear.Peaks.(Resetting.Hi.and.Lo.Peaks)
Peak values (Hi and Lo) can be cleared via the setup menu. Press the setup button; navigate to
Clear Peaks with the up/down arrows and use the select button to pick the desired function.
Dashed lines will then briey appear across the display indicating that both peak values (Hi and
Lo) have been cleared. Clearing the peaks will not aect the zero value of the main display and
will not clear the Filter value. If you need to rezero the gauge, simply press the zero button.
.X
Units
Selecting Units allows you to choose the next available unit of measurement. Use the right/left
arrow keys to change the units on the display and press select to accept the change. See the
module specications for the list of available units for your module.
Units not enabled in CrystalControl will not be available for use on the nVi-
sion. Also note that User Dened Units created in CrystalControl will also be accessible in this
listing if enabled.