Crystal nVision Reference Recorder - Software; Crystalcontrol.configuration.software; Accessories.;.Replacement.parts; Soft.carrying.case (Included)

Page 52 • Crystal Engineering Corporation
Software
CrystalControl.Conguration.Software
Unleash the power of the nVision with CrystalControl. Customize your nVision chassis with the
software’s ‘Cong’ capabilities in such areas as managing passwords, message stores, automatic
shuto and backlight timers, logging interval, and more via the mini USB B interface. Also tailor
your module’s performance in such areas as disable unwanted units, create user dened unit
(PM), change water density (PM), modify zero limits (PM), adjust calibration, change TCR and
Callendar-Van Dusen coecients used (RTD100), adjust base resistance (RTD100), and select
lead type methodology (RTD100).
Accessories./.Replacement.Parts
Soft.Carrying.Case (included)
P/N 4087: Durable, padded case with separate pockets for your nVision and accessories
Protective.Boot.(included)
P/N 3985: Skydrol™ resistant protective boot. Blue.
USB.A.to.mini.USB.B.Cable.(included)
P/N 3951: 6’ [1.8m] USB A to mini USB B Cable.
Warning: Do not use USB interface within a hazardous atmosphere (Um = 6V).
Test.Lead.Kit.(included in MA20)
P/N 3952: Two 39" [1m] 2mm banana jack test leads with multi-purpose clip. Black / Red.
RTD.Connection.Kit.(included in RTD100)
P/N 3953: One IP67 terminal block connector (RTD Module or RTD Sense Element not included).
Rack.Mount.Kit.(for nVision Lab Reference only)
P/N 4302: Two rack mount ears with required hardware (Blank panel not included).