Page 2 • Crystal Engineering Corporation
Quick.Start.Instructions
nVision Chassis Overview
Home button:
Brings you back to the default screen
(lower module numerical display)
Next button:
Progress through the display screens
Backlight button:
Turn on/o display backlight
(Adjust Backlight Shuto)
Zero button:
Press to zero Pressure Module reading (- - - - -)
Hold for 3 seconds to clear any zero value (- - -)
(Adjust Zero Limit)
Power Icon Key - nVision Lab Reference
Icon
Description
External Power
(AC Adapter)
USB Connection*
*USB Connection is for data transfer only
Power Icon Key - nVision Reference Recorder
Icon
Description
External Power
(USB)
100% 75% 50% 25% 0%**
Power Remaining
**Replace Batteries or connect to USB Power
Navigation & Select
To Next Page
Loading...