Crystal nVision Reference Recorder - Mounting; Enclosure

nVision Operation Manual • Page 37
51
2.00
0.60
15
37
1.44
25
SENSOR
DIAPHRAGM
SURFACE
1.00
ALL DIMENSIONS ARE IN MILLIMETERS [INCHES]
RTD100 MATING CONNECTOR FOR RTD PROBE SHOWN INSTALLED
RTD100 CONNECTOR
SHOWN WITHOUT PROTECTIVE CAP
PHILLIPS X 4
THUMBSCREWS WITH
SHOWN
4AA BATTERY MODULE
8MM [0.31 in] DEEP M4 X 0.7 THREADED INSERTS 4 PLACES
C
L
40 X 12 [1.6 X 0.5]
MOUNTING SURFACE
2 PL
21
0.81
1.20
2 PLACES
5.50
140
30
0.75
FLATS
WRENCH
19
3.93
ACCESS
BATTERY
100
2.88
ACCESS
73
BATTERY
20
0.79
MINI USB-B
ACCESS
FLAP
[2.41]
60
MEDIUM PRESSURE FEMALE (MPF)
(1/4" MEDIUM PRESSURE TUBE SYSTEM
WITH 7/16"-20 INTERNAL THREADS)
PRESSURE MODULE (PM) SHOWN
CRYSTAL CPF SYSTEM:
RTD100 MODULE SHOWN WITH INCLUDED PROTECTIVE CAP
[7.08]
178
110
[4.38]
204
MAXIMUM
WITH TWO
PRESSURE
MODULES
8.05
Mounting
Permanent Mounting . . . . . . . . . four M4 x 0.7 threaded inserts (8mm deep)
(see drawing for location)
Enclosure
Impact resistant injection molded housing and elastomeric protective boot compatible with
common industrial uids, including Skydrol.
Weight: 680g (1.5 lbs) including one each PM and RTD100 module, 4AA battery module, and
protective boot.