Why does my Crystal Water Filtration System show a high salt warning?
If the Crystal Water Filtration System displays a 'HIGH SALT WARNING', it could be due to the salt level being too high or the cell plates being shorted. You should check the Salt guide (sec. 6.6/8.2) to verify the salt level. Also, inspect the cell to ensure it is free of any foreign materials such as wire or metal that might be touching the plates.
What to do if Crystal Water Filtration System shows no current flow?
If the Crystal Water Filtration System shows 'NO CURRENT FLOW - NO', it could be due to a faulty CONTROL or MAIN. In this case, the PCB may be faulty, and you should contact for service. Also, increase the speed of the pump until water is covering the Cell.
General warnings about safe installation and operation of the chlorinator.
Instructions to reduce risk of injury, particularly for children using the product.
Specific warnings regarding chemical mixing and electrical safety precautions.
Guidelines for installing the power pack unit securely and safely outdoors.
Instructions for horizontally mounting the cell housing and connecting it to the pool line.
Visual guide illustrating the correct installation layout of the system components.
Maintaining ideal chlorine levels and correct salt concentration for operation.
Procedures for checking and cleaning calcium deposits from cell plates.
Details regarding the manufacturer's warranty coverage and limitations.
Information required and steps to follow when making a warranty claim.
General| Brand | Crystal |
|---|---|
| Model | VAPURE |
| Category | Water Filtration Systems |
| Language | English |
To Next Page