Crystal VAPURE - 7 Unit Menu Guide; Backwash; Brightness; Cell Cleaning

7. UNIT MENU GUIDE
18
7.2 Brightness
7.1 Backwash
BRIGHTNESS (Menu 2).
Pressing [+] or [-] allows you to adjust the BRIGHTNESS. Pressing [OK] saves the
BRIGHTNESS is entered by pressing the [OK] button in the MAIN MENU and
scrolling to
The factory setting is 60%.
7.4 Chlor Boost
7.3 Cell Cleaning
(for high calcium areas) and as high as 16 hours.
The factory setting is every 10 hours and this can be adjusted from as low as 4 hours
In areas where the calcium hardness of the water is low (less than 200ppm) cleaning of the cell may
not be
acid solution may be necessary.
necessary. Where calcium levels exceed 200ppm, regular inspection of the cell is necessary.
Cleaning in an
CELL CLEANING is entered by pressing the [OK] button in the MAIN MENU and scrolling to CELL
See 6.7 BACKWASH (CONTROL PANEL OPERATION)
See 6.3 CHLOR BOOST (CONTROL PANEL OPERATION)
www.crystalas.com
Smart self-cleaning technology allows the polarity of the OXI Cell plates to
change direction every 4-16hrs (depending on your setting). The change
of polarity causes the calcium to dislodge and keep the OXI plates clean.
Please note occasional cleaning of the plates may be necessary.
65a010a5-6d71e2d3-6b3148b4-770d42ea65a010a5-6d71e2d3-6b3148b4-770d42ea65a010a5-6d71e2d3-6b3148b4-770d42ea