7. UNIT MENU GUIDE
19
7.6 Clock/Timer
See 6.5 CLOCK/TIMER (CONTROL PANEL OPERATION)
7.7 Contrast
Pressing [+] or [-] allows you to adjust the CONTRAST adjustment and
pressing [OK] saves the required CONTRAST and returns to the DDS screen.
The factory setting is 50%.
CONTRAST is entered by pressing the [OK] button in the MAIN MENU and
scrolling to CONTRAST (Menu 7).
7.8 Power/Mode
See 6.2 POWER/MODE (CONTROL PANEL OPERATION)
7.9 Pump Setting
PUMP SETTING (Menu 9).
You can also select OFF and it will be disabled and will not stop the pump outlet.
PUMP SETTING is entered by pressing the [OK] button in the MAIN MENU and scrolling to
The default setting is 3 minutes and pressing [+] or [-] allows you to adjust the time the pump is
turned off for. Pressing [OK] saves the required protection time.
7.5 Chlor Setting
CHLOR SETTING automatically controls the Chlorine output for your VAPURE VP-Series Salt Chlorinator.
This feature is particularly handy when you want to run the pump for longer hours (i.e. maybe with a variable speed
pump or y
f this is the case the levels would be decreased.
The factory setting is set to 100%.
Pressing [+] or [-] anytime whilst in the DDS screen increases or decreases in 1% increments.
CHLOR SETTING is entered by pressing the [OK] button in the MAIN MENU and scrolling to CHLOR SETTING (Menu 5).
www.crystalas.com
enor on the ell detet there i no o o ater he pump ill e
PUMP SETTING is designed to protect your pump i there i no o o
water. This means the time the pump is allowed to run after the water
turned off from 3 to 1 minute, ater deteting no ater o
65a010a5-6d71e2d3-6b3148b4-770d42ea65a010a5-6d71e2d3-6b3148b4-770d42ea65a010a5-6d71e2d3-6b3148b4-770d42ea
To Next Page
Loading...