Crystal VAPURE - Timer Settings

Pressing [+] then it changes to Single Timer Cycle (T1).
Pressing [TIMER] displays the screen to the right.
To program the actual time of the day press [TIMER] again.
Pressing [+] changes back to Dual Timer Cycle (T2).
To program the actual time of the day press [TIMER] again.
Pressing [OK] accepts the selected cycle and enters the Timer Program.
 digit ah and preing  inreae the time and  dereae the
time.
Pressing [OK] accepts the selected hour HH.
TIMER 1: ON TIME (HH)
Pressing [<] returns you to the previous display.
Pressing [OK] accepts the selected cycle and enters the Timer Program.
TIMER 1: ON TIME (MM)
Pressing [OK] accepts the selected minute MM.
Pressing [<] returns you to the previous display.
TIMER 1: OFF TIME (HH)
 digit ah and preing  inreae the time and  dereae the
time.
Pressing [OK] accepts the selected hour HH.
MM digit ah and preing  inreae the time and  dereae the
time.
Pressing [<] returns you to the previous display.
TIMER 1: OFF TIME (MM)
MM digit ah and preing  inreae the time and  dereae the
time.
TIMER 2: ON TIME (HH)
 digit ah and preing  inreae the time and  dereae the
time.
Pressing [OK] accepts the selected hour HH.
Pressing [<] returns you to the previous display.
Pressing [OK] accepts the selected minute MM.
Pressing [<] returns you to the previous display.
you can run less hours. In extreme weather it may be necessary to run longer hours. Contact your local pool
Professional for further assistance.
Winter Settings See 6.4 WINTER MODE for more detail
Summer Settings
Ideally, run for 4 hours in the morning (6am-10am) and 4 hours in the evening (4pm-8pm). For a smaller pool
www.pentair.com
15
15
www.crystalas.com
6.52 Timer Settings
6. CONTROL PANEL OPERATION
65a010a5-6d71e2d3-6b3148b4-770d42ea65a010a5-6d71e2d3-6b3148b4-770d42ea65a010a5-6d71e2d3-6b3148b4-770d42ea