3 Introduction
3.1 CS108 RFID Sled Handheld Reader
The CS108 RFID sled handheld reader is designed to work with an off-the-shelf smart phone
(such as an iPhone or Android phone) or laptop/tablet via a Bluetooth Low Energy (Bluetooth
4.0/4.1/4.2) connection, where the application on the smart phone/laptop/tablet would control
the CS108 reader to perform RFID tag reading or barcode scanning. The tag data is collected in
the smart phone or laptop/tablet and can then be manipulated or transferred to other locations
on the Internet Cloud for further processing.
Below photo shows the smart phone and CS108 working together during operation:
Note: The Smart phone App directly searches and pairs with CS108. There is no need to first
pair with the CS108 via the normal Bluetooth Device connection page of the OS. Therefore,
install the App on your smart device first and then search and connect the CS108 from inside
the App.
To Next Page
Loading...
