24
6.6 Selecting heating mode
Press the button to switch between the different operating modes. The choice made is
indicated by a bar which appears below the symbols.
Automatic mode
Automatic mode controls the room temperature according to the time program.
Continous operation or
Continous operation maintains the room temperature at the selected operating level.
Heating to the Comfort setpoint
Heating to the Reduced setpoint
Indication
Display showing all availiable segments.
Characteristics of continous operation:
− Heating mode with no time program
− Protective functions active
− Automatic summer / winter changeover (ECO functions)
and 24-hour heating limit inactive in the case of continuous
operation with Comfort setpoint
6.5 Change Language
- Press the ”OK-button”
- Press the ”i-button” for 3 seconds, the text ”Endbenutzer” shall be visible.
- Select “Endbenutzer” and press “OK”.
- Select “Bedieneinheit” and press “OK”. “Bedieneinheit sprache” shall be visible.
- Press OK and select language and press “OK”.
- Press “ESC” and “ESC” again.
Characteristics of automatic mode:
− Heating mode according to the time program
− Temperature setpoints according to heating program
“Comfort setpoint“ or “Reduced setpoint“
− Protective functions active
− Automatic summer / winter changeover (ECO functions)
To Next Page
Loading...
