33
6.16 Time programs
For the heating circuits and DHW heating, a number of switching program are availa-
ble. They are activated in “Automatic” operation and control the change of the tempera-
ture levels via the selected switching times.
The switching times can be set in a combined way, that is, either commonly for several
days or separate times for individual days. When preselecting groups of days like for in-
stances Mo…Fr and Sa…Su that use the same switching times, setting of the switching
programs is simplifi ed.
- Press the ”OK-button”
- Select “Time prog heating circuit 1” and press “OK”.
- The text “Preselection” is shown.
- Press “OK” and the selection start fl ashing.
- You can select between program for Mo-Su, Mo-Fr, Sa-Su, or each day separately
- Select “1 st phase on” and press “OK”.
- The time start fl ashing and you can select the start time for heating “comfort
setpoint” Press “OK”
- Select “1 st phase off ” and press “OK”.
- The time start fl ashing and you can select the stop time for heating “comfort setpoint”
Press “OK”
- Phase off means that “Reduced setpoint” is active.
- It is possible to select 3 phase for each day.
- Press “ESC” and “ESC” again.
All time programs can be reset to the default settings. Each time program has its own
operating line to make this reset.
In that case, individual settings will be lost!
To Next Page
Loading...
