28
Operation Display example Description
You see the basic display.
If the basic display is not shown, press the ESC
button to return to it.
Press the OK button.
The bottom section of the display shows a number of operating pages.
Turn the setting knob until operating page
“Time of day and date“ appears.
To confi rm, press the OK button.
In the bottom section of the display,
the fi rst operating line of operating page
“Time of day and date“ appears.
Turn the setting knob until operating line
“Hours / minutes“ appears.
To confi rm, press the OK button.
1
0
4 8 12 16 20 24
AUTO
2359Z140
Room temperature
2
Text3
0
4 8 12 16 20 24
AUTO
2359Z140
Operator section
Time of day and date
3
0
4 8 12 16 20 24
AUTO
2359Z140
Time of day and date
Hours / minutes
6.13 Programming
Setting principle
Settings that cannot be made directly with the help of operating elements are made
through programming. For this purpose, the individual settings are structured in the
form of operating pages and operating lines, thus forming practical groups of settings.
The following example which shows the setting of the time of day and date shall explain
this.
Example “Setting the time of day“
◗ When pressing the ESC button, you go back one step;
adjusted values will not be adopted
◗ If no setting is made for 8 minutes, the unit will automatically return
to the basic display
◗ Operating lines may be hidden, depending on the type of unit,
their confi guration and user level
To Next Page
Loading...
