CTC Union ETU-01A - Page 58

Chapter 4. Control Port Operation
52
November 2001
Enter 1 to enter the Display System Status menu.
<< Display System Status >>
1. Timing
2. E1 Line
3. Time Slot
4. Data Port
5. Control Port
6. Alarm Buffer
7. BERT Test Result
8. Performance
9. SNMP Agent Information
A. ETU-01A Information
Enter 1-A or Press "ESC" to previous menu.
Enter 1 to display the Timing Parameters.
<< Display Timing Parameter >>
Master Timing : RECOVERY
Press "ESC" to previous menu.
The display shows that the Master Timing is recovered from the E1
link received signal.
Press ESC to return to the Display System Status menu and press 2
to display the E1 Line status.