Appendix C: Rack Mounting Option
131
November 2001
All Standalone/Rack Series units have the option of adding standard EIA
19” rack mount capability. Two rack mount options provide for either
mounting a single unit (half space) in a rack or for mounting two units in
tandem (full space). In either situation, one standard rack unit space is
required. Each rack mount kit provides all the necessary hardware for a
complete installation.
Figure C-1: Rack Mount Installation, ETU01-SS.
In single unit installations, the unit may be placed in the left or right side
position simply by reversing the rack mounting “ears”. The kit includes,
one (1) short and one (1) long rack adapter, four (4) 3x8mm self-tapping
screws, and four (4) #12-24x0.5” screws.
To Next Page
Loading...
