CTC Union ETU-01A - Menu System Detail

Chapter 4. Control Port Operation
51
November 2001
4.3 Menu System Detail
The menu systems are displayed in the same order and with
the same parameters as those in the LCD display. The following
section will detail actual displays with descriptions of parameter
settings via relevant key commands.
This is the first screen seen after connecting. Note that the first two
items, “Display” and “Define” deal with all the system settings. The
Display item will browse settings for viewing only, while under
Define, all parameters may be both viewed and changed.
********************************************
**** CTC UNION TECHNOLOGIES CO.,LTD ****
**** ETU-01A/SNMP TERMINAL MODE ****
**** SETUP MENU Ver. 1.16 ****
********************************************
1. Display System Status.
2. Define System Parameter.
3. Test Function Parameter.
4. Password
5. Reset Data to Default.
6. EXIT
DATE : 2000/08/24 TIME : 13:12:14
Enter 1-6 to select function.