CTC Union ETU-01A - Page 61

Chapter 4. Control Port Operation
55
November 2001
Press ESC to return to the Display System Status menu and press 6
to display the Alarm Buffer Display Menu screen.
<< Alarm Buffer Display Menu >>
1. Display Alarm Buffer
2. Display Remote Alarm Buffer
Enter 1-2 or Press "ESC" to previous menu.
Press 1 to view the buffer. Example follows:
<< Display Alarm Buffer >>
E1 Line SYNC Loss ON. 00/08/24 16:40:57
E1 Line MRAI ON. 00/08/24 16:40:58
E1 Line SYNC Loss OFF. 00/08/24 16:41:06
E1 Line MRAI OFF. 00/08/24 16:41:06
ETU-01A Power turn OFF. 00/08/24 18:33:27
Press "ESC" to previous menu or "SPACE" to review ,
"ENTER" to clear
Press ESC to return to the Display Alarm Buffer Menu, press
SPACE to display the screen again, or press ENTER to clear the
alarm buffer. After clearing the buffer, displaying will show:
<< Display Alarm Buffer >>
Alarm Buffer is empty.
Press "ESC" to previous menu or "SPACE" to review ,
"ENTER" to clear