CTC Union ETU-01A - Page 64

Chapter 4. Control Port Operation
58
November 2001
********************************************
**** CTC UNION TECHNOLOGIES CO.,LTD ****
**** ETU-01A/SNMP TERMINAL MODE ****
**** SETUP MENU Ver. 1.16 ****
********************************************
1. Display System Status.
2. Define System Parameter.
3. Test Function Parameter.
4. Password
5. Reset Data to Default.
6. EXIT
DATE : 2000/08/24 TIME : 15:57:51
Enter 1-6 to select function.
Now we will look at defining the system parameters. To do this,
enter 2.
<< Define System Parameter >>
1. Timing
2. E1 Line
3. Time Slot
4. Data Port
5. Date & Time
6. Remote Config Time Slot Function.
7. SNMP Agent Setup
Enter 1-7 or Press "ESC" to previous menu.