Chapter 4. Control Port Operation
83
November 2001
Press 1, to turn off BERT.
<< Bert Test Function >>
Function : OFF
1. OFF
2. ON
Enter 1-2 or Press "ESC" to previous menu.
Press ESC to the Bert Test Parameter page. Then press ESC again
to exit to the Define Test Mode screen, followed by ESC again to
the top menu page.
********************************************
**** CTC UNION TECHNOLOGIES CO.,LTD ****
**** ETU-01A/SNMP TERMINAL MODE ****
**** SETUP MENU Ver. 1.16 ****
********************************************
1. Display System Status.
2. Define System Parameter.
3. Test Function Parameter.
4. Password
5. Reset Data to Default.
6. EXIT
DATE : 2000/08/24 TIME : 21:08:01
Enter 1-6 to select function.