CTC Union ETU-01A - Page 92

Chapter 4. Control Port Operation
86
November 2001
To reset all parameters to the original factory default settings, press
5. The following will be displayed.
<< Reset Data to Factory Default. >>
Press "ENTER" to confirm, "ESC" to previous menu.
Press ENTER to reset to factory defaults. To exit without resetting
press ESC. Press ENTER.
********************************************
**** CTC UNION TECHNOLOGIES CO.,LTD ****
**** ETU-01A/SNMP TERMINAL MODE ****
**** SETUP MENU Ver. 1.16 ****
********************************************
1. Display System Status.
2. Define System Parameter.
3. Test Function Parameter.
4. Password
5. Reset Data to Default.
6. EXIT
DATE : 1999/03/01 TIME : 00:00:51
Enter 1-6 to select function.