EasyManua.ls Logo

CTEK D250SA - Troubleshooting: Fault Indications; D250 SA Faults and Solutions; SMARTPASS 120 Faults and Solutions

CTEK D250SA
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12•EN
D250SA FAULT INDICATIONS
Reason: The apparatus and/or the service battery has a
temperature that is too high.
Recommendation: Consider moving the apparatus and/or
the service battery to a cooler location.
Reason: The service battery has a connection problem.
Recommendation: Check the connections of the service
battery and its fuse.
Reason: The service battery has a connection problem.
Recommendation: Check the connections of the service
battery and its fuse.
Reason: The service battery has a connection problem.
Recommendation: Check the connections of the service
battery and its fuse.
SMARTPASS 120 FAULT INDICATIONS
SMARTPASS 120
+OUT
+OUT
+IN
Reason: Service battery is overheating.
Recommendation: Check the service battery with a battery
tester and/or check the installation.
SMARTPASS 120
+OUT
+OUT
+IN
Reason: Excessive current or internal temperature too high.
Charging current too high to the service battery.
Recommendation: Check the service battery with a battery
tester. Reduce the alternator size or connect another D250SA in
parallel. The service battery is too deeply discharged.
SMARTPASS 120
+OUT
+OUT
+IN
Reason: Excessive current or internal temperature too high. Too
many consumers connected simultaneously.
Recommendation: Consider moving the apparatus to a cooler
location or reduce the use of consumers.
SMARTPASS 120
+OUT
+OUT
+IN
Reason: Excessive current or internal temperature too high.
Current to the starter battery too high.
Recommendation: Check the starter battery with a battery
tester. Replace the starter battery if the warning repeats.
SMARTPASS 120
+OUT
+OUT
+IN
Reason: Excessive current or internal temperature too high. Too
many consumers connected.
Recommendation: Consider moving the apparatus to a cooler
location or reduce the use of consumers.
SMARTPASS 120
+OUT
+OUT
+IN
Reason: Battery guard activated. Service battery not charged
enough.
Recommendation: Charge the service battery.
SMARTPASS 120
+OUT
+OUT
+IN
Reason: Start assistance activated.
Recommendation: Charge the starter battery. Replace the
starter battery if the warning repeats.

Other manuals for CTEK D250SA

Related product manuals