Do you have a question about the CTEK MULTI US 25000 and is the answer not in the manual?
Output Voltage | 12V |
---|---|
Max Output Current | 25A |
Insulation | IP44 |
Type of Batteries | Lead-acid (Wet, MF, Ca/Ca, AGM, GEL) |
Dimensions | 235 x 130 x 65 mm |
Protection Features | Reverse polarity protection, Short circuit protection, Over-temperature protection |
Charging Modes | 8-step charging (including desulfation and reconditioning) |
Model name of the CTEK battery charger.
Specifies the compatible battery capacity range for the charger.
Warning regarding chemicals known to cause cancer or reproductive toxicity.
Instruction to retain the manual for safety and operating guidelines.
Highlights the danger of explosive gases generated by lead-acid batteries.
Guidelines for personal safety when working near lead-acid batteries.
Recommendations for safely positioning the battery charger.
Safety measures for connecting and disconnecting DC output clips.
Procedure for connecting the charger to a negative-grounded vehicle.
Procedure for connecting the charger to a positive-grounded vehicle.
Crucial safety advice for charging batteries when removed from a vehicle.
Details the Normal charging mode for various battery types.
Explains the Supply mode for maintenance charging.
Describes the Recond mode for deeply discharged batteries.
Explains the meaning of charging lamps and indicator lights.
Visual representation of the battery charging stages.
Charging step for sulphated batteries indicated by blinking lamp 1.
Initial charging phase to gradually increase voltage.
Primary charging stage restoring most battery capacity.
Final charging phase with gradually reduced current.
Suspends charging to measure battery voltage for faults.
Maintains battery at constant voltage for a period.
Maintains battery charge with pulses when not in use.
Table listing indicator lights and their meanings.
Describes situations leading to error mode and how to reset.
Table showing recommended AWG wire sizes for extension cords.