Need help?Do you have a question about the CTEK MULTI XT 14000 and is the answer not in the manual?
General| Brand | CTEK |
|---|---|
| Model | MULTI XT 14000 |
| Category | Battery Charger |
| Language | English |
Instructions for connecting the charger to a vehicle battery, including grounding.
Steps for connecting the charger to a battery removed from a vehicle.
Guidance on initiating the charging sequence and indicators.
Standard setting for wet, maintenance-free, and most Gel batteries.
Constant voltage maintenance mode for applications needing maximum capacity.
Mode to recover deep discharged flooded batteries with increased voltage.
Phase using pulses to recover sulphated batteries.
Initial charging phase until terminal voltage rises above the set limit.
Main charging phase delivering maximum current.
Phase to complete charge up to nearly 100%.
Tests the battery's ability to retain energy.
Maintains battery in perfect condition when not in use.
Description of lamps indicating charging status and modes.
Situations that cause the charger to enter fault mode.
Guidance on cleaning and general upkeep of the charger.
Details of the product's limited warranty terms and conditions.
Charging parameters for MULTI XS 25000 in Normal, Recond, and Supply modes.
Charging parameters for XS 25000 in Preset mode.
Charging parameters for MULTI XT 14000 in Normal, Recond, and Supply modes.
Charging parameters for XT 14000 in Preset mode.
Details for Analysis, Recond, Float, and Pulse phases for 12V batteries.
Details for Analysis, Recond, Float, and Pulse phases for 24V batteries.
To Next Page
