EasyManuals Logo

CTEK POWERSPORT User Manual

CTEK POWERSPORT
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
10 • EN
LEAD-ACID
CHARGING PROGRAMS
Settings are made by pressing the MODE-button. After about
two seconds the charger activates the selected program. The
selected program will be restarted next time the charger is
connected.
The table explains the different Charging
Programs:
Program Explanation
NORMAL
Normal battery program 14.4V/2.3A
Only for lead-acid batteries.
RECOND
Recond program 15.8V/0.9A
Use to restore capacity to WET and Ca/Ca
batteries. Recond your battery once per
year and after deep discharge to maximize
lifetime and capacity.
READY TO USE
The table shows the estimated time for empty battery to 80%
charge.
BATTERY CAPACITY
(Ah)
TIME TO 80%
CHARGED
5Ah 2h
10Ah 4h
15Ah 6h
20Ah 7h
25Ah 9h

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CTEK POWERSPORT and is the answer not in the manual?

CTEK POWERSPORT Specifications

General IconGeneral
Input Voltage220–240VAC, 50–60Hz
Charging Current0.8A
Back Current Drain<1Ah/month
Ambient Temperature-20°C to +50°C
Start Voltage2.0V
Ripple<4%
Protection ClassIP65
Battery Types12V: Wet, MF, Ca/Ca, AGM, GEL
Dimensions168 x 65 x 38 mm
Protection FeaturesReverse polarity protection, Short circuit proof
Output Voltage12V
Charging Modes8-step charging program

Related product manuals