Figure 9 - Z4200 Network Select
User Name and Password – Required for activation on some networks. See TechNotes for specific usage.
LCP Echo – Used on some International networks. For all US networks LCP echo packets should be turned off, meaning
this box should be unchecked. If you have questions check with Ctek support.
Wireless Connection – Used to enable/disable the wireless WAN connection.
Disabled – Turn off WAN connection
Enabled – Turn off WAN connection
Inactivity Timer – Used to specify a duration of no outbound or incoming traffic after which the WWAN connection will be
re-established.
Figure 10 - Z4400 (HSPA) Wireless Interface
To Next Page