4.2.5 Configuring the Time Source
Figure 20 - Time Source
Date and Time from: Determines the source of time for the SkyRouter and its applications
NTP Server Address: If a Network Time Protocol Server is selected its IP address goes here
Time Zone Correction: Most cellular networks report local time. If a source of time is reporting GMT and you wish to
correct it the plus/minus hours should be entered here.
4.2.6 Configuring the Location Source
Figure 21 - Location Source
Location information is used in the Automation Control application and in a number of reports and alarms. If Internal GPS
is selected the LAT/LON fields should remain blank. If User Defined is selected the LAT/LON should contain the
appropriate location coordinates specified in the decimal format. The values in the screen image above provide an
example.
To Next Page
Loading...