(Please refer to the link: https://youtu.be/CldJLXUVtp0)
Picture 9 Picture 10
① Press the power button. The indicator light will flash red and the camera
will constantly sound a chime for network configuration.
② Place your mobile phone and camera next to the router for operation.
Open the Wi-Fi setting interface of the mobile phone and find the hotspot
with the name IPCAM-XXXXXX sent by the camera. Click connect and use
the password 01234567.
This Wi-Fi is the camera hotspot. After the phone is connected, it will prompt
"The current Wi-Fi has no Internet connection." Please choose to continue
using (Picture 9 to Picture 10).
3.2 Method 2: Configure network via hotspot
Picture 6
Picture 7 Picture 8
-www.ctronics.com-
-05-
To Next Page
Loading...
Need help?
General
